iLink
- Hand-held device for ProJump mat (Dutch link)
- CapSense® buttons
- True-Color OLED Display/li>
- Powered by Lithium Ion battery
- Lithium Ion battery charger
- Comunicates with PC over USB interface
GPS Timing receiver carrier board
- For use as NTP time-reference or to calibrate atomic clocks
- Saw-tooth correction for PPS pulse
- Works with Soekris Net4501
RFID for Fitness Equipment
- Intergrated 13.56MHz PCB Antenna
- Fully isolated RS-485 bus
- Multi-Master Multidrop protocol
- Comunicates with treadmill motor controller over the MODBUS protocol
Low Power Induction Heater
- High Frequency (>100KHz) output switching
- High efficiency MOSFET H-bridge allows currents in excess of 20A
- PWM Parameters configurable via USB interface
Serial Port Timer
- Times on/off events from connected ProJump mat (Dutch link)
- Directly powered from the serial port
- Extremely tiny form factor. Fits inside D-Sub 9 housing.
Fitness Equipment Reader
- Wheatstone Bridge measures weights
- MODBUS interface communicated with treadmill
- Digital and analog I/O for heart-rate monitor, brakes, distance sensor etc…
- Communicates with panel PC through USB
IGBT Power Brigde
- High power (3.5KVA) PWM output
- High speed opto-isolated drivers
Links to external projects:
- http://isitrainin.com
- https://scanmybag.com
- https://rapidapi.com/user/tomwimmenhove
- https://github.com/tomwimmenhove
